Product Category
Product classification
High elastic shock absorption and breathable shoe-pad
Product Features
Almost suitable for all kinds of shoes, can better improve the comfort of the whole shoe
High resilience, shock absorption, good comfort
Sweat absorption, good air permeability
Lightweight
Washable
No bad smell
Can be compounded with different colors of mesh
Can do antistatic treatment
Thickness: 2.5mm~5.0mm
Width: 1.5M or 54"
Color: customized
Code：ESP
High-performance,lightweight and breathable strobel insole
Product Features
Filament mesh and felt compounded, then impregnated, used as a non-woven insole material for Strobel lasting structure.
Lightweight, breathable, small extensibility, moisture-proof
The ideal material for Strobel lasting
Thickness: 0.8~3.0mm
Width: 1.5M
Color: white, green
Code No.: NL80/100/120/130/160, ESP-N200(D),N300(D)
Strobel direct PU injection insole (DESMA）
Product Features
PP is compounded with the base fabric, and then coated. It is an ideal Strobel insole that prevents PU penetration when PU injected.
Lightweight, small extensibility
Thickness: 1.5mm, 1.75mm, 2.0mm
Width: 1.6Meter or 1.52M
color: White
Commonly used versions: IPC-1500, 1750, 2000
Advanced version: IPDE
Cement shoes insole
Product Features
Use for Cement shoes
A, Recycled raw materials can be used largely
Flexible insole with toughness and hardness for cement lasted footwear
Combines hardness and flexibility（E122)
Also available as a softer version (E121)
Also available as a stiffer product (E123)
Additional non-wicking properties available
B, Softness insole for women's shoes （NBS）
Advantages: light weight, good toughness, good resistance to tortuosity, easy to dry in contact with water, no smell
Thickness: 1.0mm~4.0mm
Size: 1M * 1.5M
Color: white, beige, grey, etc.
Vulcanized shoes insole
Product Features
Suitable for vulcanized shoe
Lightweight and high temperature resistant
Thickness: 1.0mm, 1.25mm, 1.50mm
Size: 1M*1.5M
Color: green, white, etc.
Code No.：NBA
Waterproof and breathable (non-wicking) insole
Product Features
Used for: shoes with waterproof and breathable requirements, such as hiking shoes, fishing shoes, golf shoes, etc.
Use fluorine-free water repellent, safe and environmentally friendly
The wicking requirement is less than 1cm/2 hours, in line with Gore standard
There are different thickness and hardness materials to choose from, Cement and Strobel are available
Thickness：1.25mm, 1.5mm, 2.0mm; Sheet Size: 1M *1.5M (For Cement)
Thickness. : 1.2mm，1.3mm，1.6mm; Width: 1.5Meters (For Strobel)
Colors ：Beige，White, Green
Code No.：E122-NW (For Cement)
NL120-NW, NL130-NW, NL160-NW (For Strobel)
Waterproof and breathable (non-wicking) vamp lining
Product Features
Used for: shoes with waterproof and breathable requirements, such as hiking shoes, fishing shoes, golf shoes, etc.
Use fluorine-free water repellent, safe and environmentally friendly
The wicking requirement is less than 1cm/2 hours, in line with Gore standard
There are different thickness and hardness materials to choose from, which can be used to fit the shoe upper or reinforce the shoe body
Thickiness：0.6mm,0.8mm,1.2mm,1.5mm,2.0mm
Width: 1.5Meters
Colors：Blue,White,Black
Code No.：NP-NW，SP-NW
Bonding non-woven for Rubber sole-PU connect
Product Features
The product is with 3 layers:
1, the bottom is the non-woven which connect to the rubber.
2, the middle is the special film can have very good adhesive to the PU when doing the PU injection.
3, the front is the removable heat-resistance film to stop the flowing rubber coming out to cover the middle film, this removable design can ensure that the mold is clean.
The product has good advantages,
1, increase the bonding strength much, and can make sure good quality for the soles.
2, increase the production efficiency and good quality rate and reduce labor and energy consumption
3,no need brushing means no dust, so no harmful to the workers and also keep the workshop clean.
Thickness：0.8mm, 1.2mm
Width：1.5Meter
Colors：Black，White，Beige
Colors and specifications can be customized
Code No.：NWB
Strobel antistatic PP insole(PU Injection)
Product Features
This is a non-woven midsole material designed for work shoes and safety shoes. It meets the EN20345:2011 standard. There are antistatic and non-antistatic versions.
Strong pull
Good toughness
Has good water absorption and drainage
Ensure accurate sole connection or injection molding
Thickness: 2.0mm,2,5mm,
Size (Sheet Size): 1.1M *1.6M
Colors: Grey, Beige
Other thickness or color can be customized
High temperature resistance hot-melt counter
Product Features
TPU material, anti-grease, good adhesion to leather
Impregnation product to provide firm support for the back of the shoe
High temperature resistance, hard stiffness, strong resilience
Environmental protection and energy saving, easy to shape, not easy to deform
Can be used as a toe-puff
Especially suitable for harsh high temperature environment, ideal material for training boots, military boots, etc.
Thickness：0.8~3.0mm
Sheet Size : 1M * 1.5M
Colors：White，Colors mixing，etc.
Code No.：EMT-S, EMT-D
Insulation material for snow boots
Product Features
Used to make snow boot covers and other warm footwear products
Composited insulation structure
Thickness from 2.5mm~10mm
Width：1.5M or 54“
Code No.：TIF
Goodyear-Welted, Stitch-down insole
Product Features
Quality material designed for cement lasted footwear and Veldtschoen/stitch-down constructions
Can be used in welted footwear with inclined or upright ribs
Good hardness and excellent performance
Thickness: 1.8mm~3.0mm
Sheet siz: 1M*1.5M
Color: gray, khaki, etc.
Code No.: NBC
pre
1
2
next
Tel：(+860750) 7175396 +8613703031760
Contact: Mr. Kong Fax：0750-7078585
Email：emart01@126.com
Address: liujiasong Industrial Zone, Dahuai Town, Enping City, Jiangmen City, Guangdong Province, China
Scan QR code
Copyright © Enping E-mart Enterprise Co., Ltd 粤ICP备2022046356号 Powered by 300.cn